Tammsflex 90

by Nadine De Bruyn | Apr 6, 2023 | Jointing Compounds, Products

TAMMSFLEX 90

Home > Products > Jointing Compounds > Tammsflex 90

SEMI-RIGID POLYURETHANE JOINT FILLER FOR INDUSTRIAL FLOORS

TAMMSFLEX 90 is a solvent-free, three component polyurethane joint filler designed to cure to a semi-rigid state, even under low temperature and damp conditions. It is an ideal joint filler for industrial floors where heavy loads and various chemical spillages are encountered, reducing spalling of joint edges.

Features & Benefits

Tough polyurethane performance
Excellent chemical resistance to dilute acids and alkalis
Suitable for filling cracks in old floors
Industrial and commercial floors
Concrete construction and control joints
Protection of shoulders against edge breaks, reducing floor repairs
Freezer floors

Applications

Non-moving control and construction joints
Industrial and commercial floors
Cracks and joint repairs for floors
Supports joint edges in warehouse floors
Reduces edge breaks caused by hard wheeled material handling traffic

Packaging

3 Litre kit: Tammsflex 75/90 Base, Tammsflex 90 Activator, Stonclad UT Pigment Paste

DOWNLOADS

PRODUCT DATA SHEETS

Tammsflex 90 Product Data Sheet PDF

SAFETY DATA SHEETS

Tammsflex 90 Safety Data Sheet PDF

Contact Us Regarding This Product:

Head Office: 8 Cresset Road, Midrand
Industrial Park, Chloorkop, Midrand, 1685
Tel: +27 (0) 11 254 5500
Email: stoncorsa@stoncor.co.za

Tammsflex 75

by Nadine De Bruyn | Apr 6, 2023 | Jointing Compounds, Products

TAMMSFLEX 75

Home > Products > Jointing Compounds > Tammsflex 75

SEMI-RIGID POLYURETHANE JOINT FILLER FOR INDUSTRIAL FLOORS

TAMMSFLEX 75 is a solvent-free, three component polyurethane joint filler designed to cure to a semi-rigid state, even under low temperature and damp conditions. It is an ideal joint filler for industrial floors where heavy loads and various chemical spillages are encountered, reducing spalling of joint edges.

Features & Benefits

Tough polyurethane performance
Excellent chemical resistance to dilute acids and alkalis
Suitable for filling cracks in old floors
Industrial and commercial floors
Concrete construction and control joints
Protection of shoulders against edge breaks, reducing floor repairs
Freezer floors

Applications

Non-moving control and construction joints
Industrial and commercial floors
Cracks and joint repairs for floors
Supports joint edges in warehouse floors
Reduces edge breaks caused by hard wheeled material handling traffic

Packaging

3 Litre kit: Tammsflex 75/90 Base, Tammsflex 75 Activator, Stonclad UT Pigment Paste

DOWNLOADS

PRODUCT DATA SHEETS

TAMMSFLEX 75 Product Data Sheet PDF

SAFETY DATA SHEETS

Tammsflex 75 Safety Data Sheet PDF

Contact Us Regarding This Product:

Head Office: 8 Cresset Road, Midrand
Industrial Park, Chloorkop, Midrand, 1685
Tel: +27 (0) 11 254 5500
Email: stoncorsa@stoncor.co.za

Dymonic 100

by Nadine De Bruyn | Aug 3, 2022 | Jointing Compounds, Products

DYMONIC 100

Home > Products > Jointing Compounds > Dymonic® 100

HIGH-PERFORMANCE, HIGH-MOVEMENT, SINGLE COMPONENT, POLYURETHANE SEALANT

Dymonic® 100 is a durable, flexible sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured.

Typical applications for Dymonic 100 include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors, and panels), aluminum, masonry and vinyl siding. Dymonic 100 is also an excellent choice as a fluid applied flashing material in rough opening perimeters for fenestration/window, door and curtain wall applications.

Features & Benefits

Can adhere to damp or green concrete and has a skin time of 2 hr with a tack-free time of 6 to 8 hr to significantly reduce dirt attraction.
Movement capability of +100/-50% in typical field conditions, is low VOC, paintable, jet fuel-resistant, and will not crack, craze or yellow under extreme UV exposure.
Suitable for water immersion and will not out gas.
Formulated with an innovative polymer technology, similar to
TREMproof® 250GC and Vulkem® 45SSL, Dymonic 100 is highly versatile and has a unique capability to adhere to damp or green concrete and will not out gas.
Compatible and can be coated over with Tremco’s Vulkem Deck Coatings, ExoAir® Air Barrier products and the cold, fluid-applied TREMproof® line of below-grade waterproofing products.
Accepted/Compatible for use over Nudura Insulated Concrete Forms (ICF)

Applications

Dymonic 100 is easy to apply with conventional caulking equipment. Ensure that the backer rod is fitted properly for friction and that any necessary primers have been applied.
Fill the joint completely with a proper width-to-depth ratio, and then tool to ensure intimate contact of sealant with joint substrates.
Dry tooling is always preferred, although compatible wetting agents can be used in limited amounts to slick the spatula if needed after an initial pass.
For a cleaner finish, mask the sides of the joint with tape prior to filling.

Packaging

10.1-oz (300-mL) cartridges
20-oz (600-mL) sausages

DOWNLOADS

PRODUCT DATA SHEETS

Dymonic® 100 Product Data Sheet PDF

SAFETY DATA SHEETS

Dymonic® 100 Safety Data Sheet PDF

Contact Us Regarding This Product:

Head Office: 8 Cresset Road, Midrand
Industrial Park, Chloorkop, Midrand, 1685
Tel: +27 (0) 11 254 5500
Email: stoncorsa@stoncor.co.za

TREMflex 50

by Nadine De Bruyn | Aug 3, 2022 | Jointing Compounds, Products

TREMFLEX 50

Home > Products > Jointing Compounds > TREMflex 50

One Part, High Movement, Easy to Gun, Polyurethane Joint Sealant

TREMflex 50 is a low modulus joint sealant, especially formulated to ensure bubble free cure even at very high temperatures and humidity climatic conditions. It cures by reaction with atmospheric humidity to produce a joint sealant with a 50% joint movement accommodation factor. The sealant guns and tools consistently well at even the most extreme temperatures.

Features & Benefits

No bubbling/swelling upon curing in difficult climatic conditions
Green Star Compliant
Excellent adhesion on a wide variety of substrates without priming necessary
Excellent extrusion, tooling & storage stability over wide range of climatic conditions
Good chemical resistance
Low modulus, joint movement accommodation +/- 50%
Microorganism & fungus resistant
Excellent heat resistance, suitable for application where exposure to temperatures > 60 Celsius take place
Resistance to cold: The sealant remains elastic even down to – 40 Celsius

Applications

Under waterproofing membranes
Cast In Place concrete
Precast panels
Brick & block work
Metal

Packaging

600ml Sausages – 15 per box

DOWNLOADS

PRODUCT DATA SHEETS

TREMflex 50 Product Data Sheet PDF

SAFETY DATA SHEETS

TREMflex 50 Safety Data Sheet PDF

Contact Us Regarding This Product:

Head Office: 8 Cresset Road, Midrand
Industrial Park, Chloorkop, Midrand, 1685
Tel: +27 (0) 11 254 5500
Email: stoncorsa@stoncor.co.za

Euco QWIKjoint UVR

by EuclidMaster | Nov 24, 2020 | Jointing Compounds, Products

EUCO QWIKJOINT UVR

Home > Products > Jointing Compounds > Euco QWIKjoint UVR

HIGHER HARDNESS, UV-RESISTANT POLYUREA FLOOR JOINT FILLER

EUCO QWIKJOINT UVR is a polyurea joint filler designed for use in commercial and industrial concrete floors that receive heavy forklift and equipment traffic. The hardness of QWIKjoint UVR provides increased protection from joint damage, while still offering a user-friendly shave time and resistance to colour change from exposure to ultraviolet light. QWIKjoint UVR is available in grey.

Features & Benefits

Unparalleled UV resistance
Fast setting formula reduces downtime
Large shave-time window allows for greater flexibility in scheduling joint filling operations
Tough performance reduces floor joint repairs and maintenance
Will cure in temperatures as low as -29°C
No bubbles/foaming when used in damp joints
Less moisture-sensitive than standard polyureas

Applications

Concrete construction & control joints
Crack and joint repair for old floors
Industrial and commercial floors
Freezer floors

Specifications / Compliances

EUCO QWIKjoint UVR complies with ACI 302 performance recommendations regarding control and construction joint fillers

Packaging

EUCO QWIKjoint UVR is a two-component product packaged in 40 L kits for all 33 standard colors. The mix ratio for all packaging sizes is 1:1.

DOWNLOADS

PRODUCT DATA SHEETS

Euco QWIKjoint UVR Product Data Sheet PDF

SAFETY DATA SHEETS

Euco QWIKjoint UVR Base Safety Data Sheet PDF

Euco QWIKjoint UVR Activator Safety Data Sheet PDF

Contact Us Regarding This Product:

Head Office: 8 Cresset Road, Midrand
Industrial Park, Chloorkop, Midrand, 1685
Tel: +27 (0) 11 254 5500
Email: stoncorsa@stoncor.co.za